+31 40 8080 193   +31 40 8080 193

CO2 laser machine cleaner

26,95 ex.VAT | 32,61 incl

The CO2 laser machine cleaner is a refill package for your CO2 laser machine maintenance package. Bio Clean cleaner for cleaning the inside of the machine and guides before using lubricant.

SKU: MQ-OP-20 Category: Tag:

Description

Contents CO2 laser machine cleaner

The CO2 laser machine cleaner is a refill pack for your CO2 laser machine maintenance package. Bio Clean cleaner for cleaning the guides before using lubricant.

Bio-Clean

During the use of the laser cutting machine, vapors, dust and cutting residue are generated that descend into the machine and are therefore also absorbed in the lubricants / greases. In order to maintain a properly functioning machine, the contaminated fats must be removed regularly.
Preferably clean the machine once a month in normal use. Use a cloth or paper towel to remove the excess and existing grease from the guides. This means that most of the contaminated fat has already been removed.
Now use the BIO CLEAN to inject the guides and any ballscrew with a moderate dose of liquid through the nozzle. After spraying, rub it clean with a cloth that does not fluff and make sure the parts are free of grease and contaminants. The parts are then ready to be provided with new grease.

ATTENTION: Do not use the BIO CLEAN on MIRRORS AND LENSES !! Avoid touching the liquid with the lenses and mirrors. Apply as carefully as possible to the parts to be cleaned, not to be used on electronic components.

1 litre.